Danfoss VLT AutomationDrive FC 300 Design Manual page 74

4. FC 300 Selection
60 PWM - Pulse Width Modulation, 525 - 690 V (except P315)
4
Illustration 4.17: Derating of I
closure D at 690 V, using 60 PWM in High torque mode (160%
over torque). Note:
Illustration 4.19: Derating of I
closure D at 690 V, using 60 PWM in Normal torque mode
(110% over torque). Note:
60 PWM - Pulse Width Modulation, 525 - 690 V, P315
Illustration 4.21: Derating of I
closure D at 690 V, using 60 PWM in High torque mode (160%
over torque). Note: P315
74
for different T
out AMB, MAX
not
valid for P315.
for different T
out AMB, MAX
not
valid for P315.
for different T
out AMB, MAX
only .
MG.33.BA.02 - VLT
SFAVM - Stator Frequency Asyncron Vector Modulation, 525 -
690 V (except P315)
for en-
Illustration 4.18: Derating of I
closure D at 690 V, using SFAVM in High torque mode (160%
over torque). Note:
for en- Illustration 4.20: Derating of I
closure D at 690 V, using SFAVM in Normal torque mode
(110% over torque). Note:
SFAVM - Stator Frequency Asyncron Vector Modulation, 525 -
690 V, P315
for en-
Illustration 4.22: Derating of I
closure D at 690 V, using SFAVM in High torque mode (160%
over torque). Note: P315
® is a registered Danfoss trademark
FC 300 Design Guide
for different T
out AMB, MAX
not valid for P315.
for different T
out AMB, MAX
not
valid for P315.
for different T
out AMB, MAX
only
.
for en-
for en-
for en-