Danfoss VLT AutomationDrive FC 300 Design Manual page 108

6. How to Install
Mains connection for frame sizes A1, A2 and A3:
Mains connector A5 (IP 55/66) Enclosure
6
When disconnector is used (A5 enclosure) the PE must be mounted on the left side of the drive.
Illustration 6.18: Mains connection B1 and B2 (IP 21/NEMA
Type 1 and IP 55/66/ NEMA Type 12) enclosures.
Illustration 6.20: Mains connection B4 (IP20) enclosure.
108
Illustration 6.19: Mains connection B3 (IP20) enclosures.
Illustration 6.21: Mains connection C1 and C2 (IP 21/ NEMA
Type 1 and IP 55/66/ NEMA Type 12) enclosures.
MG.33.BA.02 - VLT ® is a registered Danfoss trademark
FC 300 Design Guide