Blower Motor - Henny Penny Wendy’s Evolution Elite EEG-153 Service Manual

6-16. BLOWER MOTORS
May 2012
The blower motor assembly creates the draft for the burners. If the
blower motor fails, the air switch fails to close, causing an "E-20B"
error code in the display.
Replacement
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
1. Remove the bottom, rear panel.
2. Using a 3/8" socket or nut driver, remove the nuts securing the
blower brackets to the fryer.
3. Remove the brackets from the blower.
4. Remove the pressure tube from the blower.
5. Locate and cut wires and remove blower from unit.
6. Connect the new blower motor wires to the fryer using wire
nuts, and install the new blower motor in reverse order as
above.
Before installing the bottom, rear cover, clean the blower intake
slots to ensure sufficient air flow to the blowers.
6-18
Model EEG-153, 154