Specifying A Destination (Specifying A Destination Pc Using The Screen Keyboard) - Fuji Xerox Color C60 User Manual

4 Scan
[Add to Address Book] Screen
This screen allows you to register the save destination specified in [Browse], in the Address
Book.
1
Select [Add to Address Book].
2
Select [Save].
Address
To change the address number, select [Edit] and then the desired number.
Name
To change the recipient name, enter a new name with the keyboard displayed by selecting
[Name].
Note
Specifying a Destination (Specifying a Destination PC Using the Screen
Keyboard)
Enter information in the fields provided for the selected protocol, to specify a forwarding
destination.
Important • When using the Scan to My Folder feature in computer environment earlier than Windows 98/
4
Note
1
Select the item to be set.
Note
2
Enter information using the keyboard displayed on the screen.
For information on how to enter characters, refer to "Entering Text" (P.73).
Note
Server
This option is displayed when you select [FTP] or [SMB] in [Transfer Protocol]. Enter a server
name or IP address. When the save location is in the DFS namespace on Windows, enter a
domain name or server name. Up to 64 characters are allowed.
The following are examples:
Note
For [FTP]:
Server name: myhost.example.com
220
• The recipient name may not be displayed depending on the settings.
®
Windows NT , a destination user name in the earlier format (domain name\user name) will not be
determined automatically.
Before scanning, change the user name with which you can log in correctly.
• When you select [Login to Remote Accounts] for [Login Type] and select [Enabled] for [Scan to My
Folder] using CentreWare Internet Services, the scanned document can be transferred to a different
destination. You can select [Enabled] for [Scan to My Folder] only when [Login to Remote Accounts]
and [SMB] are selected for [Login Type] and [Transfer Protocol] respectively.
• You can also select [Address Book] to enter
information.
• Fields displayed on the screen vary
depending on the selected protocol.
• To delete characters, select [Backspace].
• When Scan to My Folder feature is enabled, [Server] is automatically determined on the [Scan to PC]
screen. If you change the setting of [Server], the [Scan to My Folder] feature is disabled. You can use
the [Scan to My Folder] feature again by selecting [Scan to My Folder] for [Transfer Protocol].