System Requirements - ProSoft MVI56E-FLN User Manual

MVI56E-FLN ♦ ControlLogix Platform
FA Control Network Ethernet Communication Module
1.2

System Requirements

The MVI56E-FLN module requires the following minimum hardware and software
components:

Rockwell Automation ControlLogix
higher), with compatible power supply, and one free slot in the rack for the
MVI56E-FLN module. The module requires 800 mA of available 5 Vdc power

Rockwell Automation RSLogix 5000 programming software

Rockwell Automation RSLinx

ProSoft Configuration Builder (PCB) (included)

ProSoft Discovery Service (PDS) (included in PCB)

®
Pentium
recommended

Supported operating systems:
o Microsoft Windows 10
o Microsoft Windows 7 Professional (32-or 64-bit)
o Microsoft Windows XP Professional with Service Pack 1 or 2
o Microsoft Windows Vista
o Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3
o Microsoft Windows Server 2003

128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended

100 Mbytes of free hard disk space (or more based on application
requirements)

256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color
1024 x 768 recommended)
Note: The Hardware and Operating System requirements in this list are the
minimum recommended to install and run software provided by ProSoft
®
Technology . Other third party applications may have different minimum
requirements. Refer to the documentation for any third party applications for

system requirements.

Note: You can install the module in a local or remote rack. For remote rack
installation, the module requires EtherNet/IP or ControlNet communication with
the processor.
ProSoft Technology, Inc.
®
communication software version 2.51 or higher
II 450 MHz minimum. Pentium III 733 MHz (or better)
®
processor (firmware version 10 or
Start Here
User Manual
Page 11 of 155