Mounting/Dismounting Manual Disconnect Modules - Honeywell CENTRA LINE LION CLLIONLC01 Installation & Commissioning Instructions

LION System
Dismounting Electronic Modules
Note
Electronic modules can be removed from the socket or
inserted into the sockets without switching off the power
supply. The behavior of connected field devices must be
taken into consideration.
Open the red locking mechanism by sliding it to the left
►
and then gently pull the electronic module out of the
terminal socket.
Fig. 23 Dismounting the electronic module
Mounting/Dismounting Manual Disconnect
Modules
XS812 and XS812RO Manual Disconnect Modules are
mounted on the terminal socket appropriate for the
electronic module, see Table 4 on page 6. The electronic
module is mounted onto the manual disconnect module.
WARNING
Risk of electric shock or equipment damage!
The XS812RO Manual Disconnect Module is designed
for 24 V applications only!
Never use the XS812RO Manual Disconnect Module with
►
line voltage.
Mounting Manual Disconnect Modules
Make sure that manual disconnect module, electronic
►
module and terminal socket match, see Table 4 on
page 6.
Make sure that the red locking mechanism is in the open,
►
i.e., left, position.
Gently push the manual disconnect module onto the
►
terminal socket until snug.
Lock the red locking mechanism by sliding it to the right.
►
Fig. 24 Mounting the manual disconnect modules
21
Mounting/Dismounting Modules
EN1Z-0921GE51 R0709