Table of Contents
Advertisement
EAGLEHAWK NX CONTROLLER – INSTALLATION & COMMISSIONING INSTRUCTIONS
MOUNTING/DISMOUNTING
Before Installation
IMPORTANT
To allow the evaporation of any condensation resulting from low shipping / storage temperatures, keep the controller at
room temperature for at least 24 h before applying power.
US requirement, only: This device must be installed in a UL-listed enclosure offering adequate space to maintain the
segregation of line voltage field wiring and Class 2 field wiring.
In the case of vertical mounting on DIN rails, the EAGLEHAWK NX controller should be secured in place using a commercially-
available stopper. See also the EAGLEHAWK NX - Mounting Instructions (MU1Z-1039GE51).
Dimensions
2
1
RS485-1
J1
J8
1
2
Fig. 20. EAGLEHAWK NX controller (w/o HMI but with RJ45 socket for connection of portable HMI, and with full
J1
J8
Fig. 21. EAGLEHAWK NX controller with covers, dimensions (in mm)
NOTE: Use of the covers (MVC-80-AC1) obstructs access to the Ethernet and USB 2.0 Host Interfaces and RS232 socket.
215.5
24 25 26
27 28 29 30 31 32
33 34 35 36 37
5
6
7
8
9 10
11 12 13 14 15 16 17 18
complement of onboard I/Os), dimensions (in mm)
215.5
38 39
40 41 42 43 44 45 46 47
45
19 20 21 22 23
19
57.5
49.5
52
57.5
52
EN1Z-1039GE51 R1218
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
