Mounting/Dismounting; Before Installation; Dimensions - Honeywell CIPer 50 Installation & Commissioning Instructions

Hide thumbs Also See for CIPer 50:
Table of Contents

Advertisement

MOUNTING/DISMOUNTING

Before Installation

IMPORTANT
To allow the evaporation of any condensation resulting from low shipping / storage temperatures, keep the controller
at room temperature for at least 24 h before applying power.
US requirement, only: This device must be installed in a UL-listed enclosure offering adequate space to maintain the
segregation of line voltage field wiring and Class 2 field wiring.
In the case of vertical mounting on DIN rails, the CIPer Model 50 controller should be secured in place using a
commercially-available stopper. See also the CIPer Model 50 - Mounting Instructions (31-00234EFS).

Dimensions

Fig. 20. CIPer Model 50 controller (w/o HMI but with RJ45 socket for connection of portable HMI, and with full
Fig. 21. CIPer Model 50 controller with covers, dimensions in mm (inches)
NOTE: Use of the covers (MVC-80-AC1) obstructs access to the Ethernet and USB 2.0 Host Interfaces and RS232 socket.
CIPer MODEL 50 CONTROLLER – INSTALLATION & COMMISSIONING INSTRUCTIONS
complement of onboard I/Os), dimensions (in mm)
15
31-00233EFS-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents