M Changing The Ip Address On The Setting Screen - Icom VE-PG4 Installation Manual

1
BEFORE USING THE VE-PG4
The setting screen
■ Changing the IP address on the setting screen
Network Settings > IP Address > IP Address
L Make sure the VE-PG4's IP address does not conflict other network devices.
1
Click "Network Settings", and then click "IP Address".
2
In the "IP Address" screen, enter the new IP Address and then click <Apply>.
• The changes are saved.
3
Click <Back> to return to the previous page.
• The login menu is displayed.
4
Confirm the new IP address is displayed, and then login the VE-PG4 again.
IP Address assigning
An IP Address consists of two parts, the "Network" and "Host."
For example, in the VE-PG4's IP address "192.168.0.1" (Class C), the digits "192.168.0" are the network
digits and the "1" at the end is the host digit.
Network devices with the same network numbers are recognized as belonging to the same network.
Furthermore, the network devices in the network are identified by the host part.
Assign the IP Address considering the following points.
• Set the identical network digits for all the devices that you want to add into the network.
• Do not set the same host digit to network devices in the same network.
• Do not set the network address whose the first digit of the host part is "0."
• Do not set the broadcast address whose the last digit of the host part is "255."
1-19
q Enter
w Click