Icom VE-PG4 Installation Manual page 58

3
WIRELESS LAN TRANSCEIVERS
Configuring the wireless LAN transceiver system
■ The Talkgroup Call
Selecting the Talkgroup call using the IP100H
 Using the [FUNC] key
Usable only when the Talkgroup Call function is assigned
to the [FUNC] key.
1. Push [FUNC] several times to select a Talkgroup.
L Push [FUNC] to select the assigned functions such as
Message, Status, Area Call, and so on.
2. Push [▲] or [▼] to select the Talkgroup ID.
3. Push [CLR] to return to the standby screen.
L You can talk with the IP100Hs or IP100FSs that are set to
the same group number. (Example: 0091)
L When you select Talkgroup Call, you are released from
your previous selected group.
L When "OFF" is selected in step 2, the Talkgroup is
released.
 Using the [ ] key
Usable only when the Talkgroup Call function is assigned
to the [ ] key.
1. Push [ ] several times to select Group (or
Talkgroup.)
L Push [ ] to select the assigned functions such as All,
Individual, and so on.
2. Push [▲] or [▼] to select a Talkgroup number.
3. Push [CLR] to return to the standby screen.
L You can talk with the IP100Hs or IP100FSs that are set to
the same group number. (Example: 0091)
L When you select Talkgroup Call, you are released from
your previous selected group.
L When "Group" is selected in step 2, the Talkgroup is
released.
Talkgroup
OFF
Talkgroup
0091
TG1
10/8 16:57
TG1
Standby screen
when a Talkgroup is
selected
Group
0005
Sales 1
Talkgroup
0091
TG1
10/8 16:57
TG1
Standby screen
when a Talkgroup is
selected
3-10
[FUNC]
[CLR/ ]
[▲]/[▼]
[ ](ID LIST)
[CLR/ ]
[▲]/[▼]