Icom VE-PG4 Installation Manual page 9

1
BEFORE USING THE VE-PG4
Panel description
■ Front panel
[CONSOLE] PORT
7
(USB 2.0/1.1) ������
[USB1] PORT
8
(USB 3.0) ��������
18 17 16 15
Connect a USB (mini B type) cable (user supplied) to remotely
configure the VE-PG4 from a PC using a terminal software (user
supplied.)
About the USB driver
To use the [CONSOLE] port, the USB driver for the Icom network
devices is required.
Download it from the Icom website and install it on your PC.
http://www.icom.co.jp/world/support/
Connect a USB flash drive (user supplied) to save or restore settings or
to update the firmware.
L You can save the recorded audio on a data storage device through the USB
port. Only one storage device can be connected to the USB port at a time.
L Be sure to back up the data on the USB flash drive before connecting it to
the VE-PG4.
L A USB flash drive, such as one with biometric authentication, or one with
password protection is not supported.
L Some USB devices may not be usable with the VE-PG4.
L The VE-PG4 accepts up to two CT-24s for optional AMBE+2 vocorders.
1 2 3 4 5 6
14 13 12 11 10 9
1-3
7
8