Icom VE-PG4 Installation Manual page 5

INTRODUCTION
Network and system default settings
Menu Item Screen
Network Settings IP Address
DHCP Server
Router Settings WAN
Connection Port EXT I/O (EXT)
Settings
Management Administrator
L See the Operating guide for more details on above settings.
L The Administrator's Username (admin) cannot be changed.
To prevent unauthorized access
• You must choose a strong password and change it occasionally.
• Choose one that is not easy to guess.
• Use numbers, characters and letters (both lower and upper case).
Confirming the MAC address
The MAC address of the built-in WAN or LAN module of the VE-PG4 is shown on the Serial label at the
bottom of the product.
L You can also check the MAC address on the setting screen. See the Operating guide for details.
VE-PG4 (Bottom)
The contents of the serial label may vary,
depending on the version.
Setting Item
IP Address
DHCP Server
Connection Type
EXT I/O Port Mode
EXT I/O
Transceiver Model
Administrator Password
0090C7
0090C7
Option
IP Address
Subnet Mask
DHCP Server
Connection Type
Connected Unit
EXT I/O Port
Transceiver Model
Username
Current Password:
MAC address for WAN MAC address for WAN
MAC address for LAN MAC address for LAN
iv
Value
192.168.0.1
255.255.255.0
Disable
LAN Port
Transceiver (EXT 1/2)
EXT I/O Unit (EXT 3/4)
EXT I/O 1 (EXT 1)
IC-F5060/F6060
admin (fixed)
admin (lower case)