Icom VE-PG4 Installation Manual page 51

3
WIRELESS LAN TRANSCEIVERS
Before using the wireless LAN transceiver controller
■ Installation overview
5
Transceiver Controller > Common Settings
Set the common settings of each group that the IP100Hs or IP100FSs belong to, and are registered on
the Transceiver Registration screen.
ID List screen
Register the unit IDs that are registered on the Transceiver Registration screen, or the group IDs that are
registered on the Destination Settings screen.
L When an RoIP Gateway's bridge connection is made with the RoIP Gateway, you can register the telephone
number of the IP phone.
Message screen
Enter up to 10 messages that the IP100H will send.
L Up to 32 characters can be entered for each message.
Status screen
Enter up to 10 statuses that the IP100H will send.
L Up to 32 characters can be entered for each status.
Profile screen
Select the ID list and message list of the group that the IP100H belongs to.
6
Customize the settings if required.
Transceiver Controller > Transceiver settings > Transceiver settings
Setting for the microphone gain, VOX function, or headset. (When an optional microphone is connected)
Transceiver Controller > Common Settings > Profile
Setting for the Ringers and Talkback timer.
3-3