Icom VE-PG4 Installation Manual page 46

2
SETTING UP THE TRANSCEIVERS
Connecting the speaker microphone
Connection Port Settings > Microphone (MIC)
Destination Settings > Destination Settings
4
Open the Destination Settings screen.
(Destination Settings > Destination Settings)
5
In [Destination Settings], add a check mark to "Microphone (MIC)" in "IP Transceiver Controller/
Connection Port" to the setting of that you want to call using the microphone, and then click <Apply>.
Check when you want to call to transceiver Group
(0006) from the microphone
2-21
q Select
w Click