Icom VE-PG4 Installation Manual page 17

1
BEFORE USING THE VE-PG4
Feature description
■ Controlling wireless LAN transceivers
 Talkgroup
The Talkgroup Call function enables wireless LAN transceivers and IP transceivers to select the group that
belong to it from previously registered groups in the VE-PG4.
When users select Talkgroup 1000, terminals are excluded from the original groups, as illustrated below.
When Talkgroup is OFF
0001
All
When Talkgroup is selected
All
• Talkgroup Calls require registering the Talkgroups in the [Destination Settings] screen and [ID List] screen. If the
"Talkgroup Type" in the [Destination Settings] screen is set to "Multiplex Talkgroup," a IP100H can make a Talkgroup Call
between the linked Talkgroups.
(Transceiver Controller > Common Settings > ID List)
(Destination Settings > Destination Settings > Destination Settings > Talkgroup Type*)
*Displayed only when [Call Type] is set to "Talkgroup."
• Set to the VE-PG4 whether All Call includes the Talkgroup or not, or the Talkgroup Call calls the IP100FS or not.
• The ID List and the destination settings set in the VE-PG4 are commonly used in each group that the IP100H and
IP100FS belong to.
Group 0100
0002 0003
Talkgroup 1000
Group 0100
0001 0002 0003
Talkgroup 1000
0009
0004
0006
0004 0006
1-11
Group 0101
0007 0008 0009
Talkgroup 1001
Group 0101
0007 0008
Talkgroup 1001