Icom VE-PG4 Installation Manual page 4

INTRODUCTION
Options
• OPC-2273
connection cable
for the IC-M604A/M605
(Length: Approximately
5m/16.4 ft)
• OPC-2389
connection cable
for the Icom serial
communication device
(Length: Approximately
5m/16.4 ft)
• HM-241
speaker microphone
(Future product)
to directly make a call on the
VE-PG4.
• RC-FS10
remote communicator
to create a virtual radio or
simple dispatcher on a PC.
L Necessary to communicate with
an Icom repeater.
* The VE-PG4 has 4 internal AMBE+2 Vocoder corresponding to the CT-24. When you need more than 5 AMBE+2
1
Vocoder you can add up to 2 CT-24s to the RoIP Gateway, according to the combination of the connected devices or
using voice protocol.
Refer to the Section 5 in the Operating guide.
* An optional OPC-2276
2
• OPC-2275
for the IC-F5060/F6060 and
IC-A120/E
(Length: Approximately
• OPC-2390
for the IC-FR5000/FR6000
(Length: Approximately
• HM-152
to make a call on the VE-
PG4.*
is required.
connnection cable
connection cable
5m/16.4 ft)
connection cable
5m/16.4 ft)
microphone
2
iii
(As of April, 2019)
• OPC-2276
connection cable
for the Icom microphone and
speaker
(Length: Approximately
5m/16.4 ft)
• CT-24*
1
digital voice converter
to communicate using
AMBE+2™ codec.
• SM-26
desktop microphone
to make a call on the VE-
PG4.*
2