Icom VE-PG4 Installation Manual page 10

1
BEFORE USING THE VE-PG4
Panel description
■ Front panel
INDICATORS
[EXT1] ~ [EXT4] �����
9
[MIC] ����������
10
[USB1] ���������
11
[VPN] ����������
12
[WAN] ���������
13
[MSG] ���������
14
18 17 16 15
Lights green: Receiving an audio signal.
Lights orange: In audio/data communication with transceivers (Full
Lights red:
Not lit:
Lights green: Receiving an audio signal through [MIC].
Lights orange: Communicating through [MIC] (Full duplex).
Lights red:
Lights green: A USB flash drive is connected.
Blinks green: Accessing the USB flash drive.
Lights red:
Not lit:
Lights green: At least one IPsec tunnel has been established.
Not lit:
Lights green: Connected to the WAN line.
Blinks red:
Not lit:
Lights green: A firmware update is ready.
Blinks green: Initialization is in progress./Firmware update is in
Not lit:
1 2 3 4 5 6
14 13 12 11 10 9
duplex).
In audio/data communication with transceivers
(Receive).
Condition other than the above.
Sending an audio signal through [MIC].
Failed loading a firmware or backup data from the
USB flash drive.
Condition other than the above.
Not connected./VPN not used./Invalid setting.
Authentication succeeded (PPPoE)
Succeed to obtain IP address (DHCP client)
Authentication error/failed (PPPoE)
Failed to obtain IP address (DHCP client)
Condition other than the above.
progress.
Condition other than the above.
1-4
7
8