Icom VE-PG4 Installation Manual page 39

2
SETTING UP THE TRANSCEIVERS
NXDN Conventional mode operation
Destination Settings > Destination Settings
■ Setting for the transceivers
1
Open the Destination Settings screen.
(Destination Settings > Destination Settings)
2
In [Destination Settings], enter the setting for the transceiver B1 (Name, Call Type, Destination ID, and
Additional Controller/IP Transceiver Controller/Connection Port), and then click <Apply>.
3
Add the transceiver B2, C1, C2 as the same way.
4
In [Destination Settings], enter the setting for the Group 0006 (Name, Call Type, Destination ID, and
Connection Port), and then click <Apply>.
5
Add the Group 0007 as the same way.
Check when you want to call to Group 0006 from the
transceiver C1 or C2
2-14
q Enter
w Click
q Enter
w Select
e Click
(☞ Continued on the next page)