YASKAWA MOTOMAN DX200 Instructions Manual page 33

HW1486011
4 Allocating I/O Signals
4.2 When Setting with Only the Maintenance Mode
11. Select {YES}.
– Select {YES} if the mounting status of the I/O modules is right.
The I/O module setting is updated and the display changes to the
external I/O setup window.
12. The EXTERNAL IO SETUP window is displayed.
13. Select "AUTO" or "MANUAL" for the allocation mode.
– After "AUTO"/"MANUAL" is selected, the selection menu is
displayed.
If the allocation mode is changed from "MANUAL" to
"AUTO", the allocation data that has been set will be lost,
NOTE
and re-allocating will be executed in the auto mode. If the
set allocation data need to be kept, save the data in the
external memory menu in advance.
4-16
HW1486011
33/61