YASKAWA MOTOMAN DX200 Instructions Manual page 35

HW1486011
4 Allocating I/O Signals
4.2 When Setting with Only the Maintenance Mode
17. Select "MODIFY" and enter the desired external input signal number
to replace the original. ('20300'is entered in the setting example.)
– The external input signal number will be changed.
18. Select and change the external input signal number with the same
steps.
– Repeat the selecting and changing operation for the desired
allocation.
19. Press [ENTER].
– The EXTERNAL IO ALLOCATION(OUTPUT) window is displayed.
20. Select and change the external output signal number with the same
procedure as the external input signal number.
– Repeat the selecting and changing operation for the desired
allocation.
4-18
HW1486011
35/61