YASKAWA MOTOMAN DX200 Instructions Manual page 26

4 Allocating I/O Signals
4.2 When Setting with Only the Maintenance Mode
TERMINAL OUTPUT SETTING
8
This item is displayed when enabling the above mentioned
" TERMINAL OUTPUT FUNCTION". Set ENABLE / DISABLE of this
6
function.
For details of this function, refer to chapter 4.2.7 "Terminal Output Set-
ting" .
M REGISTER
9
This item is displayed when enabling the above mentioned
" TERMINAL OUTPUT SETTING".
8
Set the M register's leading number as the destination of the terminal
output setting.
Before setting the number, confirm that M register is not used for the dif-
ferent purposes.
4-9
HW1486011
HW1486011
26/61