YASKAWA MOTOMAN DX200 Instructions Manual page 43

HW1486011
4 Allocating I/O Signals
4.3 When Setting with the PC Tool and the Maintenance Mode
14. Select "AUTO" or "MANUAL" for the allocation mode.
– After "AUTO"/"MANUAL" is selected, the selection menu is
displayed.
If the allocation mode is changed from "MANUAL" to
"AUTO", the allocation data that has been set will be lost,
NOTE
and re-allocating will be executed in the auto mode. If the
set allocation data need to be kept, save the data in the
external memory menu in advance.
15. Select the allocation mode to be set.
– When allocating the I/O signal automatically, select "AUTO". When
allocating the I/O signal manually, select "MANUAL".
– The selected allocation mode will be set.
4-26
HW1486011
43/61