YASKAWA MOTOMAN DX200 Instructions Manual page 30

4 Allocating I/O Signals
4.2 When Setting with Only the Maintenance Mode
– (Details of each setting item)
INSERT
1
A new setting is added to the current No. When the current No. has
already registered, the registered setting is changed to the next No.
MODIFY
2
The targeted registration name is modified. (When no name is registered,
the new name is registered.)
DELETE
3
The targeted registration name is deleted.
DETAIL
4
Details of the device information list are displayed.
– "*" is shown as follows when the setting value changes after
displaying the details.
3. Select "MODIFY".
– The registered device information list appears.
– For the setting methods of the device information list, refer to
chapter 4.2.2 "Device Information List Setting" .
4-13
HW1486011
HW1486011
30/61