Data Transfer Timeout; Association Count; Logging Dicom - FujiFilm DRYPIX 2000 Service Manual

[PC3-5] Common
[PC3-5-1] Data Transfer Timeout
<FUNCTION>
Command for setting the timeout value for network communication.
<OPERATIONS>
1.
Enter the timeout value. (Unit: seconds)
<REMARKS>
• The timeout value is the maximum time limit for the printer to wait for data to
arrive. If data does not arrive within the set time, a timeout occurs.
• Normally, use the default timeout. If this default value does not work properly
for the connected DICOM client, set the value given by the DICOM client.
• Setting range: 30 to 3600 (default value: 300)
2.
[Execute]
3.
Reboot the equipment.
[PC3-5-2] Association Count
<FUNCTION>
Command for setting the number of associations to be established together for
DICOM connection.
<OPERATIONS>
1.
Set according to the installation environment.
[1] to [10] (default value: 10)
2.
[Execute]
3.
Reboot the equipment.
016-201-04E
02.15.2007 FM5075
[PC3-5-3] Logging DICOM
<FUNCTION>
Command for setting whether to save the record of communication with the client as
log information, and the communication record level.
<OPERATIONS>
1.
Select the value to be set.
• [0: none] : No logging of communication record
• [1: normal] : Normal log information
• [2: detail] : Detailed log information (default)
2.
[Execute]
3.
Reboot the equipment.
DRYPIX 2000 Service Manual
MU-99
MU-99