FujiFilm DRYPIX 2000 Service Manual page 664

[PC3-5-5-23] Image Crop UPDWN Area
<FUNCTION>
Command for setting whether the top or bottom is to be trimmed from CR image that
is larger than the image box.
<REMARKS>
The applicable film sizes are 20x25 cm, 26x36 cm, 35x43cm, 25x30 cm.
<OPERATIONS>
1.
Select the value to be set.
[0: Upper]/[1: Lower]/[2: Both]
2.
[Execute]
3.
Reboot the equipment.
[PC3-5-5-24] Image Crop Side Area
<FUNCTION>
Command for setting whether the left or right is to be trimmed from CR image that is
larger than the image box.
<REMARKS>
The applicable film sizes are 20x25 cm, 26x36 cm, 25x30 cm.
<OPERATIONS>
1.
Select the value to be set.
[0: Left]/[1: Right]/[2: Both]
2.
[Execute]
3.
Reboot the equipment.
016-201-06E
01.27.2012 FM5920
[PC3-5-6] Annotation
Set and enter the character string of the annotation to be printed on film.
<NOTE>
If annotation is set even though the extension format has been set, the following error
message will be displayed.
"Because 'Extension Format ID' is set, 'Annotation' cannot be set."
{MU (DRYPIX Lite):3.4 [PC3-5-1-10]_Extension Format ID}
[PC3-5-6-1] Annotation Font
<FUNCTION>
Command for setting the font type of the annotation.
<OPERATIONS>
1.
Select the font.
• [0: Japanese]
• [1: Western]
2.
[Execute]
3.
Reboot the equipment.
[PC3-5-6-2] Annotation Extend
<FUNCTION>
Command for setting the extension of the printing area of annotations along the height
of the characters.
<NOTE>
Use of this function is prohibited.
DRYPIX Lite Service Manual
MU-75
MU-75