FujiFilm DRYPIX 2000 Service Manual page 950

9.2 Connecting the PC for Servicing to the
Equipment (Web Server Start)
Start the Web server of the equipment.
1.
Check that the power of the equipment is ON.
2.
Press the <DOWN> key while pressing the <UP>key on the operation
panel for about 5 seconds until you hear a blip.
→ T he Web server starts on the equipment. The display on the operation panel
will not change even when the Web sever is started by the equipment.
016-201-04E
02.15.2007 FM5075
9.3 Connecting the PC for Servicing to the
Equipment (Starting PC-Utility)
Connect the communication of the PC for servicing to the equipment.
1.
Start Internet Explorer on the PC for servicing.
2.
Enter the following address in the address bar, and then press the
<ENTER> key on the key board.
http://equipment IP address:20051/USER/Login.htm
<NOTE>
When entering the address, discriminate between upper and lower cases.
→ T he login screen is displayed.
DRYPIX 2000 Service Manual
IN-77
IN-77