Upgrading; Full Install - FujiFilm DRYPIX 2000 Service Manual

[PC5] Upgrading
Perform full installation or version upgrading of the main unit software.
Use the main unit software copied to the FTP folder in the PC for servicing when
performing full installation or version upgrading of the equipment.
For details on version upgrading or full installation procedure using the PC for
servicing, refer to "Inspections, Replacements, Adjustments (MC)".
{MC:12.1_Installing from the PC for Servicing}
<NOTE>
Before starting this procedure, the individual data should be backed up because
it will be initialized by [Full Install].
[PC5-1] Full Install
[PC5-2] Upgrading
n Copying main unit software to the PC for servicing
<OPERATIONS>
1.
Load the main unit software CD-R into the CD-ROM drive.
→ " DPX2CopyTool.exe" starts automatically and [DPX2 Copy Tool] window is
displayed.
<REMARKS>
If it does not start automatically, double-click "DPX2CopyTool.exe" in the CD-R
and start it.
<NOTE>
"DPX2CopyTool.exe" must be started from the CD-ROM drive.
"DPX2CopyTool.exe" may not function properly if started from a copy on
the desktop, etc.
2.
Enter the drive name into [Input drive of FTP-Home].
3.
Click [Copy] of [Please specify the drive of FTP-Home].
016-201-04E
02.15.2007 FM5075
→ T he main unit software will be copied in the FTP folder (C:\Program Files\
FujiFilm\DRYPIX\DPX2000).
→ W hen completed, the [Success.] screen appears.
4.
[OK]
5.
Click [EXIT] to close [DPX2 Copy Tool] window.
6.
Unload the main unit software CD-R from the CD-ROM drive.
DRYPIX 2000 Service Manual
MU-106
MU-106