Sensor Monit. - FujiFilm DRYPIX 2000 Service Manual

[7-9] Sensor Monit.>
<FUNCTION/PURPOSE>
Command for performing sensor monitoring. Sensor monitoring can be performed on
sensors, interlocks, and fuses.
Sensor monitoring consists of two methods; selecting a sensor and displaying the ON/
OFF status (alarm sounds) and grouping sensors and displaying their status.
• Individually displaying and checking: Select [Each] in the following procedure.
• Grouping and checking: Select [All] in the following procedure.
<REMARKS>
For [Each], can also check with the alarm which sounds according to ON.
<OPERATIONS>
n Displaying Individually and Checking
1.
[7-9-1.Each] →
2.
Select one of the below.
• [7-9-1-1.Sensor 1>]
• [7-9-1-2.Sensor 2>]
• [7-9-1-3.Fuse>]
3.
Select the sensor using the <UP> key/<DOWN> key, and check sensor
operations.
n Grouping and Checking
1.
[7-9-2.All] →
2.
Switch the display using the <UP> key/<DOWN> key, and check
sensor operations.
016-201-03E
10.18.2006 FM5036
n Display Example
DRYPIX 2000 Service Manual
MU-43
MU-43