Table of Contents
Advertisement
[PC3-4-5-22]
Processing Type
<FUNCTION>
Command for setting the density processing calculation method.
<OPERATIONS>
1.
Select the value to be set.
• [0: Type1]
• [1: Type2]
<REMARKS>
Type 1: Density processing calculation method which interpolates the measured
density.
Type 2: Density processing calculation method with smoother tonal representation
than Type1. Tonal conversion continuity is better in low density areas
below density of 0.4.
2.
[Execute]
3.
Reboot the equipment.
016-201-04E
02.15.2007 FM5075
[PC3-4-5-23]
Image Crop UPDWN Area
<FUNCTION>
Command for setting whether the top or bottom is to be trimmed from CR image that
is larger than the image box.
<REMARKS>
The applicable film sizes are 20x25 cm, 26x36 cm, 35x43cm, 25x30 cm.
<OPERATIONS>
1.
Select the value to be set.
[0: Upper]/[1: Lower]/[2: Both]
2.
[Execute]
3.
Reboot the equipment.
[PC3-4-5-24]
Image Crop Side Area
<FUNCTION>
Command for setting whether the left or right is to be trimmed from CR image that is
larger than the image box.
<REMARKS>
The applicable film sizes are 20x25 cm, 26x36 cm, 25x30 cm.
<OPERATIONS>
1.
Select the value to be set.
[0: Left]/[1: Right]/[2: Both]
2.
[Execute]
3.
Reboot the equipment.
DRYPIX 2000 Service Manual
MU-97
MU-97
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
