Sheet-Feeder Unit - FujiFilm DRYPIX 2000 Service Manual

11. SHEET-FEEDER UNIT

As the disassembly procedure of the sheet-feeder unit is more or less the same as
the equipment main body, only parts with different procedures are indicated here.
For other parts with the same procedure, refer to the disassembly procedure of the
equipment. If the difference lies only in the removal of covers, descriptions are omitted
here.
Refer to the procedure of the equipment or the following table to check if procedures
are described in the following for parts of the sheet-feeder unit.
Part Name Part Shape/Position
Cover
Film size detection sensor as-
sembly (SA21, SA22, SA23)
Film removing motor (MB21)
Suction cup arm
016-201-04E
02.15.2007 FM5075
Refer to
{MC:1_COVER}
FPDC1110.AI
{MC:3.1_Film Size
Detection Sensor
Assembly (SA11/
SA12/SA13)}
FPDC1111.AI
{MC:11.1_Sheet-
feeder Unit Film
Removing Motor
(MB21)}
FPDC1112.AI
{MC:4.2_Suction Cup
Arm}
FPDC1113.AI
Part Name Part Shape/Position
Suction cup
Bellows
Removal drive cam
Removal conveyance roller
lower
Suction cup arm HP detection
sensor (SB12)
Film surface detection sensor
(SB22)
DRYPIX 2000 Service Manual
MC-75
Refer to
{MC:4.3_Suction
Cup}
FPDC1114.AI
{MC:4.4_Bellows}
FPDC1115.AI
{MC:4.5_Removal
Drive Cam}
FPDC1116.AI
{MC:4.6_Removal
Conveyance Roller
Lower}
FPDC1117.AI
{MC:4.7_Suction Cup
Arm HP Detection
Sensor (SB11)}
FPDC1118.AI
{MC:4.8_Film Surface
Detection Sensor
(SB12)}
FPDC1119.AI
MC-75