Check Mech; Film Removing; Check Individual Operations; Check Series Of Operations - FujiFilm DRYPIX 2000 Service Manual

[7] Check Mech.>
[7-1] Film Removing>
<FUNCTION/PURPOSE>
Command for checking the operations of the removal mechanism.
<OPERATIONS>
1.
Select the magazine slot if the sheet-feeder unit is installed.
[Slot1]/[Slot2]
2.
Execute [Home Position].
→ The suction cup arm moves to the home position.
<NOTE>
If [Home Position] is not executed first, error will result.
3.
"Completed." → → [Home Position]
4.
Execute [l Check Individual Operations] or [l Check Series of
Operations] to check the operation.
<NOTE>
After executing the above check, be sure to remove film at the conveyance
entrance.
016-201-04E
02.15.2007 FM5075
l Check Individual Operations
1.
[Home Position] →
2.
Check individual operations in the following order:
[Film Surface] → [Film Suction] → [Upper Limit] → [Film Fanning] →
[Film Release] → [Pre-feeding] → [Grip Release]
→ Individual operations will be carried out to the selected position. "Wait.." is
displayed while it is executed. If operations end normally, "Completed." will be
displayed.
l Check Series of Operations
1.
[Home Position] →
→ A series of removal operations are performed. "Wait.." is displayed while it is
executed. If operations end normally, "Completed." will be displayed.
DRYPIX 2000 Service Manual
→ [Unit Ope.>] →
→ [Film Convey>] →
MU-35
MU-35