Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Maple Systems HMC7000 Series
Summary of Contents for Maple Systems HMC7000 Series
- Page 1 I/O Module Guide For the HMC7000 Series Your Industrial Control Solutions Source _____________________ www.maplesystems.com For use with the following: HMC7000 Series Digital and Analog I/O Modules Maple Systems, Inc. | 808 134 St. SW, Suite 120, Everett, WA 98204 | 425.745.3229...
-
Page 2: Copyright Notice
HMC7000 Series I/O Module Guide COPYRIGHT NOTICE This manual is a publication of Maple Systems, Inc., and is provided for use by its customers only. The contents of the manual are copyrighted by Maple Systems, Inc.; reproduction in whole or in part, for use other than in support of Maple Systems equipment, is prohibited without the specific written permission of Maple Systems. -
Page 3: Table Of Contents
HMC7000 Series I/O Module Guide TABLE OF CONTENTS COPYRIGHT NOTICE ..............................1 WARRANTY .................................1 TECHNICAL SUPPORT ..............................1 TABLE OF CONTENTS ..............................2 Introduction ................................6 I/O Modules ................................7 HMC7-MI-01 (16 Digital Input Module) .........................7 Specifications: ..............................7 Wiring: ................................8 Configuration: ..............................8 To implement High Speed Counter Operation: ....................9 HMC7-MI-02 (4 Input Analog Module) ........................ - Page 4 HMC7000 Series I/O Module Guide Wiring: ................................22 Configuration: ..............................22 HMC7-MO-03 (16 Sourcing Output Module) ...................... 23 Specifications: ..............................23 Wiring: ................................24 Configuration: ..............................24 HMC7-MIO-01 (8 Bidirectional Input, 8 Sinking Output Digital Module) ............25 Specifications: ..............................25 Wiring: ................................
- Page 5 HMC7000 Series I/O Module Guide Wiring: ................................45 Configuration: ..............................47 To implement High Speed Counter Operation: ....................48 Normal PWM ..............................49 CW/CCW ................................49 Pulse/Direction ..............................50 To implement PWM Operation: ........................51 HMC7-MIO-06 (8 Bidirectional Input, 6 Relay, 2 Sinking Output Digital Module) ..........52 Specifications: ..............................
- Page 6 I/O Terminals ................................80 Installing I/O Modules ............................80 Configuring the I/O Modules ..........................80 Configuration of the HMC7000 Series High Speed Counters ................83 Configuration Register ............................84 Specific High Speed Counter Registers ........................ 84 Retaining the High Speed Counter Values ......................87...
-
Page 7: Introduction
(2 PWM, Sourcing 0.5A), 6 Relay HMC7-MIO-08 4 Programmable Analog Inputs, 2 Programmable Analog Outputs Some HMC7000 Series models have built in I/O. These units are also CE and UL Certified. HMC Part No. Description 3” LCD, 18 membrane-style keys, 1 serial port, 1 USB slave port,... -
Page 8: I/O Modules
HMC7000 Series I/O Module Guide I/O Modules HMC7-MI-01 (16 Digital Input Module) This module is a digital input module for the HMC7000 Series models. It has sixteen bidirectional inputs, two of which are high-speed inputs. Specifications: Power 3.9 VDC from HMC7000 base... -
Page 9: Wiring
HMC7000 Series I/O Module Guide Wiring: For connecting to NPN-type transistor inputs: Connecting to PNP-type transistor inputs: Configuration: Use MAPware-7000 to assign input (X and XW) and configuration (M and MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. -
Page 10: To Implement High Speed Counter Operation
HMC7000 Series I/O Module Guide Reference the table below when configuring each HSC Configuration Register (MWnn00 and MWnn06): Bits Function 15-4 Not used 0 : Falling Edge 1 : Rising Edge 2, 1, 0 Module Operating Mode : 000 : Normal Operation... -
Page 11: Hmc7-Mi-02 (4 Input Analog Module)
HMC7000 Series I/O Module Guide HMC7-MI-02 (4 Input Analog Module) This module is an analog input module for the HMC7000 Series models. It has four analog inputs, which can measure 0-10V, - 10 to +10V, 0-20mA, and 4-20mA signals. Specifications: Power 3.9 VDC from HMC7000 base... -
Page 12: Wiring
HMC7000 Series I/O Module Guide General Operating Temperature 0 to 55°C Operating Humidity 10% to 90% (non condensing) Mechanical Dimension (LxWxH) 3.11x1.18x1.42 inches [79x30x36mm] Input Power Supply Input Voltage 24VDC Input Current 50mA Wiring: For connecting to analog voltage inputs:... - Page 13 HMC7000 Series I/O Module Guide Reference the table below when configuring each Input Configuration Register (MWnn00-MWnn03 Input Channel Value Signal Type mA (4-20mA) Voltage (0-10V) Voltage (-10 to +10V) mA (0-20mA) HMC7000 Series I/O Module Guide...
-
Page 14: Hmc7-Mi-03 (8 Voltage Input Analog Module)
HMC7000 Series I/O Module Guide HMC7-MI-03 (8 Voltage Input Analog Module) This module is an analog input module for the HMC7000 Series models. It has eight analog inputs, which can measure 0-10V, and -10 to +10Vsignals. Specifications: Power 3.9 VDC from HMC7000 base... -
Page 15: Wiring
HMC7000 Series I/O Module Guide Wiring: Configuration: Use MAPware-7000 to assign input (XW) and configuration (MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. 01…05):... - Page 16 HMC7000 Series I/O Module Guide Reference the table below when configuring each Input Configuration Register (MWnn00-MWnn07): Input Channel Value Signal Type Voltage (0 - 10V) Voltage (-10 to +10V) HMC7000 Series I/O Module Guide...
-
Page 17: Hmc7-Mi-04 (8 Current Input Analog Module)
HMC7000 Series I/O Module Guide HMC7-MI-04 (8 Current Input Analog Module) This module is an analog input module for the HMC7000 Series models. It has eight analog inputs, which can measure 0-20mA, and 4-20mA signals. Specifications: Power 3.9 VDC from HMC7000 base... -
Page 18: Wiring
HMC7000 Series I/O Module Guide Wiring: Configuration: Use MAPware-7000 to assign input (XW) and configuration (MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. 01…05):... - Page 19 HMC7000 Series I/O Module Guide MWnn06 Input Channel 7 Configuration Register Read/Write MWnn07 Input Channel 8 Configuration Register Read/Write Reference the table below when configuring each Input Configuration Register (MWnn00-MWnn07): Input Channel Value Signal Type Current (0 - 20mA) Current (4 – 20mA)
-
Page 20: Hmc7-Mo-01 (12 Relay Output Module)
HMC7000 Series I/O Module Guide HMC7-MO-01 (12 Relay Output Module) This module is a digital output module for the HMC7000 Series models. It has twelve relay outputs. Specifications: Power 3.9 VDC from HMC7000 base Approvals CE, UL Digital Outputs 12 relay outputs... -
Page 21: Wiring
HMC7000 Series I/O Module Guide Wiring: Configuration: Use MAPware-7000 to assign output (Y and YW), and configuration (MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. -
Page 22: Hmc7-Mo-02 (16 Sinking Output Module)
HMC7000 Series I/O Module Guide HMC7-MO-02 (16 Sinking Output Module) This module is a digital output module for the HMC7000 Series models. It has 16 sinking (NPN) outputs. Specifications: Power 3.9 VDC from HMC7000 base Approvals CE, UL Digital Outputs... -
Page 23: Wiring
HMC7000 Series I/O Module Guide Wiring: Configuration: Use MAPware-7000 to assign output (Y and YW) addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. 01…05):... -
Page 24: Hmc7-Mo-03 (16 Sourcing Output Module)
HMC7000 Series I/O Module Guide HMC7-MO-03 (16 Sourcing Output Module) This module is a digital output module for the HMC7000 Series models. It has 16 sourcing (PNP) outputs. Specifications: Power 3.9 VDC from HMC7000 base Approvals CE, UL Digital Outputs... -
Page 25: Wiring
HMC7000 Series I/O Module Guide Wiring: Configuration: Use MAPware-7000 to assign output (Y and YW) addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. 01…05):... -
Page 26: Hmc7-Mio-01 (8 Bidirectional Input, 8 Sinking Output Digital Module)
HMC7000 Series I/O Module Guide HMC7-MIO-01 (8 Bidirectional Input, 8 Sinking Output Digital Module) This module is a digital input/output module for the HMC7000 Series models. It has eight bidirectional inputs and eight sinking digital outputs. Two of the inputs can be configured as high speed counters (HSC) using the MW registers (see below). -
Page 27: Wiring
HMC7000 Series I/O Module Guide Operating Temperature 0 to 55°C Operating Humidity 10% to 90% (non condensing) Mechanical Dimension (LxWxH) 3.11x1.18x1.42 inches [79x30x36mm] Input Power Supply Input Voltage 24VDC Input Current 4A maximum Wiring: For connecting to bidirectional inputs: Connecting to NPN-type transistor outputs:... -
Page 28: Configuration
HMC7000 Series I/O Module Guide Configuration: Use MAPware-7000 to assign input (X and XW), output (Y and YW), and configuration (M and MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. -
Page 29: To Implement High Speed Counter Operation
HMC7000 Series I/O Module Guide To implement High Speed Counter Operation: 1. Connect a device to X0 (Channel 1) or X5 (Channel 2) that will provide the high speed pulses to the expansion module. 2. Configure the HSC using the configuration register MWnn00 (Channel 1) or MWnn06 (Channel 2). -
Page 30: Hmc7-Mio-02 (8 Bidirectional Input, 8 Sourcing Output Digital Module)
HMC7000 Series I/O Module Guide HMC7-MIO-02 (8 Bidirectional Input, 8 Sourcing Output Digital Module) This module is a digital input/output module for the HMC7000 Series models. It has eight bidirectional inputs and eight sourcing digital outputs. Two inputs can be configured as high speed counters (HSC) using the MW registers (see below). -
Page 31: Wiring
HMC7000 Series I/O Module Guide Operating Temperature 0 to 55°C Operating Humidity 10% to 90% (non condensing) Mechanical Dimension (LxWxH) 3.11x1.18x1.42 inches [79x30x36mm] Input Power Supply Input Voltage 24VDC Input Current 4A maximum Wiring: For connecting to bidirectional inputs: Connecting to PNP-type sourcing outputs:... -
Page 32: Configuration
HMC7000 Series I/O Module Guide Configuration: Use MAPware-7000 to assign input (X and XW), output (Y and YW), and configuration (M and MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. -
Page 33: To Implement High Speed Counter Operation
HMC7000 Series I/O Module Guide High Speed Counter Operation To implement High Speed Counter Operation: 1. Connect a device to X0 (Channel 1) or X5 (Channel 2) that will provide the high speed pulses to the expansion module. 2. Configure the HSC using the configuration register MWnn00 (Channel 1) or MWnn06 (Channel 2). -
Page 34: Hmc7-Mio-03 (2 Input 2 Output Analog Module)
HMC7-MIO-03 (2 Input 2 Output Analog Module) This module is an analog input/output module for the HMC7000 Series models. It has two analog inputs, which can be used to measure 0-10V, -10 to +10V, 0-20mA, and 4-20mA signals. It also has two analog outputs to provide 0-10V, 0- 20mA, and 4-20mA signals. - Page 35 HMC7000 Series I/O Module Guide Output Load Minimum 1000 Ohm At 25°C: 0.05% of full scale Accuracy Overall Accuracy (-25°C to 55°C) +10ppm/°C of full scale Current Mode Output Range 4mA-20mA Value of LSB 3.9 μA Output Load Maximum 500 Ohm At 25°C: 0.2% of full scale...
-
Page 36: Wiring
HMC7000 Series I/O Module Guide Wiring: For connecting to analog voltage inputs: For connecting to analog current inputs: Connecting to analog voltage outputs: Connecting to analog current outputs: Configuration: Use MAPware-7000 to assign input (XW), output (YW), and configuration (MW) memory addresses to the module. - Page 37 HMC7000 Series I/O Module Guide Reference the table below when configuring each Input/Output Configuration Register (MWnn00-MWnn03) Input Channel Value Signal Type mA (4-20mA) Voltage (0-10V) Voltage (-10 to +10V) mA (0-20mA) Output Channel Value Signal Type mA (4-20mA) Voltage (0-10V)
-
Page 38: Hmc7-Mio-04 (8 Bidirectional Input, 8 Sinking Output Digital Module)
HMC7000 Series I/O Module Guide HMC7-MIO-04 (8 Bidirectional Input, 8 Sinking Output Digital Module) This module is a digital input/output module for the HMC7000 Series models. It has eight bidirectional inputs and eight sinking digital outputs. Four of the inputs can be configured as high speed counters (HSC) using the MW registers (see below). -
Page 39: Wiring
HMC7000 Series I/O Module Guide High Speed Channels No. of Outputs 2 channels (Y2 and Y4) General Operating Temperature 0 to 55°C Operating Humidity 10% to 90% (non condensing) Mechanical Dimension (LxWxH) 3.11x1.18x1.42 inches [79x30x36mm] Input Power Supply Input Voltage... -
Page 40: Configuration
HMC7000 Series I/O Module Guide Connecting to Sinking PWM Outputs: Configuration: Use MAPware-7000 to assign input (X and XW), output (Y and YW), and configuration (M and MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. -
Page 41: To Implement High Speed Counter Operation
HMC7000 Series I/O Module Guide Quadrature Inputs Pair 1 Pair 2 Counter Inputs X0, X5 X2, X7 Rd Only Counter Reset Input Rd Only Output Flag Rd/Write PWM Outputs PWM1 PWM2 Output Rd Only Reference the table below when configuring each HSC Configuration Register:... -
Page 42: Normal Pwm
HMC7000 Series I/O Module Guide Reference the tables below when configuring the PWM outputs: Normal PWM Function Register Description Output Physical Output Configuration Register MWnn24 MWnn30 Value = 1 for this mode Frequency Setting Register MWnn25 MWnn25 Range = 1 to 10000... -
Page 43: Pulse/Direction
HMC7000 Series I/O Module Guide Pulse/Direction Function Register Description Output, PWM Pulse Physical Output Output, PWM Direction Configuration Register MWnn24 Value = 7 for this mode Frequency Setting Register MWnn25 Range = -10000 to -1; MWnn26 1 to 10000 Output Enable Flag... -
Page 44: To Implement Pwm Operation
HMC7000 Series I/O Module Guide Total Pulses Reached MWnn49_0 ON when Total Pulses have been sent To implement PWM Operation: 1. Configure the PWM output using the configuration register for that channel and mode. 2. Set the parameters values for the selected mode. Monitor the error flags for the parameters. -
Page 45: Hmc7-Mio-05 (8 Bidirectional Input, 8 Sourcing Output Digital Module)
HMC7000 Series I/O Module Guide HMC7-MIO-05 (8 Bidirectional Input, 8 Sourcing Output Digital Module) This module is a digital input/output module for the HMC7000 Series models. It has eight bidirectional inputs and eight sinking digital outputs. Four of the inputs can be configured as high speed counters (HSC) using the MW registers (see below). -
Page 46: Wiring
HMC7000 Series I/O Module Guide High Speed Channels No. of Outputs 2 channels (Y2 and Y4) General Operating Temperature 0 to 55°C Operating Humidity 10% to 90% (non condensing) Mechanical Dimension (LxWxH) 3.11x1.18x1.42 inches [79x30x36mm] Input Power Supply Input Voltage... - Page 47 HMC7000 Series I/O Module Guide Connecting to Sinking PWM Outputs: HMC7000 Series I/O Module Guide...
-
Page 48: Configuration
HMC7000 Series I/O Module Guide Configuration: Use MAPware-7000 to assign input (X and XW), output (Y and YW), and configuration (M and MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. -
Page 49: To Implement High Speed Counter Operation
HMC7000 Series I/O Module Guide Reference the table below when configuring each HSC Configuration Register: Input Mode Output Mode Register Value Normal Input High Speed, Output ON when preset is reached Single Phase, Up Counter Output ON when counter is enabled,... -
Page 50: Normal Pwm
HMC7000 Series I/O Module Guide Configuring PWM Outputs Reference the tables below when configuring the PWM outputs: Normal PWM Function Register Description Output Physical Output Configuration Register MWnn24 MWnn30 Value = 1 for this mode Frequency Setting Register MWnn25 MWnn25... -
Page 51: Pulse/Direction
HMC7000 Series I/O Module Guide Pulse/Direction Function Register Description Output, PWM Pulse Physical Output Output, PWM Direction Configuration Register MWnn24 Value = 7 for this mode Frequency Setting Register MWnn25 Range = -10000 to -1; MWnn26 1 to 10000 Output Enable Flag... -
Page 52: To Implement Pwm Operation
HMC7000 Series I/O Module Guide Total Pulses Reached MWnn49_0 ON when Total Pulses have been sent To implement PWM Operation: 1. Configure the PWM output using the configuration register for that channel and mode. 2. Set the parameters values for the selected mode. Monitor the error flags for the parameters. -
Page 53: Hmc7-Mio-06 (8 Bidirectional Input, 6 Relay, 2 Sinking Output Digital Module)
HMC7000 Series I/O Module Guide HMC7-MIO-06 (8 Bidirectional Input, 6 Relay, 2 Sinking Output Digital Module) This module is a digital input/output module for the HMC7000 Series models. It has eight bidirectional inputs and six relay outputs (3 per common), plus two sinking digital outputs. Four of the inputs can be configured as high speed counters (HSC) using the MW registers (see below). -
Page 54: Wiring
HMC7000 Series I/O Module Guide High Speed Channels No. of Outputs 2 channels (Y2 and Y4) General Operating Temperature 0 to 55°C Operating Humidity 10% to 90% (non condensing) Mechanical Dimension (LxWxH) 3.11x1.18x1.42 inches [79x30x36mm] Input Power Supply Input Voltage... - Page 55 HMC7000 Series I/O Module Guide For connecting to PWM outputs: For connecting to relay outputs: HMC7000 Series I/O Module Guide...
-
Page 56: Configuration
HMC7000 Series I/O Module Guide Configuration: Use MAPware-7000 to assign input (X and XW), output (Y and YW), and configuration (M and MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. -
Page 57: To Implement High Speed Counter Operation
HMC7000 Series I/O Module Guide Reference the table below when configuring each HSC Configuration Register: Input Mode Output Mode Register Value Normal Input High Speed, Output ON when preset is reached Single Phase, Up Counter Output ON when counter is enabled,... -
Page 58: Normal Pwm
HMC7000 Series I/O Module Guide Configuring PWM Outputs Reference the tables below when configuring the PWM outputs: Normal PWM Function Register Description Output Physical Output Configuration Register MWnn24 MWnn30 Value = 1 for this mode Frequency Setting Register MWnn25 MWnn25... -
Page 59: Pulse/Direction
HMC7000 Series I/O Module Guide Pulse/Direction Function Register Description Output, PWM Pulse Physical Output Output, PWM Direction Configuration Register MWnn24 Value = 7 for this mode Frequency Setting Register MWnn25 Range = -10000 to -1; MWnn26 1 to 10000 Output Enable Flag... -
Page 60: To Implement Pwm Operation
HMC7000 Series I/O Module Guide Total Pulses Reached MWnn49_0 ON when Total Pulses have been sent To implement PWM Operation: 1. Configure the PWM output using the configuration register for that channel and mode. 2. Set the parameters values for the selected mode. Monitor the error flags for the parameters. -
Page 61: Hmc7-Mio-07 (8 Bidirectional Input, 6 Relay, 2 Sourcing Output Digital Module)
HMC7000 Series I/O Module Guide HMC7-MIO-07 (8 Bidirectional Input, 6 Relay, 2 Sourcing Output Digital Module) This module is a digital input/output module for the HMC7000 Series models. It has eight bidirectional inputs and six relay outputs (3 per common), plus two sourcing digital outputs. Four of the inputs can be configured as high speed counters (HSC) using the MW registers (see below). -
Page 62: Specifications
HMC7000 Series I/O Module Guide Specifications: Power 3.9 VDC from HMC7000 base Approvals CE, UL Digital Inputs 8 bidirectional inputs Rated input voltage 24 VDC Rated input current Up to 5mA Input impedance 4.9K ohms Minimum ON voltage 15 VDC... -
Page 63: Wiring
HMC7000 Series I/O Module Guide Wiring: For connecting to high-speed inputs: For connecting to normal inputs: For connecting to PWM outputs: For connecting to relay outputs: HMC7000 Series I/O Module Guide... -
Page 64: Configuration
HMC7000 Series I/O Module Guide Configuration: Use MAPware-7000 to assign input (X and XW), output (Y and YW), and configuration (M and MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. -
Page 65: To Implement High Speed Counter Operation
HMC7000 Series I/O Module Guide Reference the table below when configuring each HSC Configuration Register: Input Mode Output Mode Register Value Normal Input High Speed, Output ON when preset is reached Single Phase, Up Counter Output ON when counter is enabled,... -
Page 66: Normal Pwm
HMC7000 Series I/O Module Guide Configuring PWM Outputs Reference the tables below when configuring the PWM outputs: Normal PWM Function Register Description Output Physical Output Configuration Register MWnn24 MWnn30 Value = 1 for this mode Frequency Setting Register MWnn25 MWnn25... -
Page 67: Pulse/Direction
HMC7000 Series I/O Module Guide Pulse/Direction Function Register Description Output, PWM Pulse Physical Output Output, PWM Direction Configuration Register MWnn24 Value = 7 for this mode Frequency Setting Register MWnn25 Range = -10000 to -1; MWnn26 1 to 10000 Output Enable Flag... -
Page 68: To Implement Pwm Operation
HMC7000 Series I/O Module Guide To implement PWM Operation: 1. Configure the PWM output using the configuration register for that channel and mode. 2. Set the parameters values for the selected mode. Monitor the error flags for the parameters. 3. Enable the output by setting the Enable Output that channel. -
Page 69: Hmc7-Mio-08 (4 Input Analog / 2 Analog Output Module)
HMC7000 Series I/O Module Guide HMC7-MIO-08 (4 Input Analog / 2 Analog Output Module) This module is an analog input/output module for the HMC7000 Series models. It has four universal analog inputs, which can measure 0 to 50mV, 0 to 100 mV;... -
Page 70: Wiring
HMC7000 Series I/O Module Guide Operating Humidity 10% to 90% (non-condensing) Mechanical Dimension (LxWxH) 3.11x1.18x1.42 inches [79x30x36mm] Input Power Supply Input Voltage 24VDC Input Current 80mA (max) Wiring: For connecting to analog voltage inputs: Connecting to analog current inputs: HMC7000 Series I/O Module Guide... - Page 71 HMC7000 Series I/O Module Guide For connecting to RTD inputs: For connecting to mV/thermocouple inputs: For connecting to voltage outputs: For connecting to current outputs: HMC7000 Series I/O Module Guide...
-
Page 72: Configuration
HMC7000 Series I/O Module Guide Configuration: Use MAPware-7000 to assign input (XW) and configuration (MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn refers to the slot number (ex. 01…05):... - Page 73 HMC7000 Series I/O Module Guide Reference the table below when configuring each Input Configuration Register (MWnn00-MWnn03): Input Channel Value Value Signal Type Voltage, 0 to 10V Voltage, 0 to 5V Voltage, -10 to +10V Voltage, 0 to 50mV Voltage, 0 to 100mV...
-
Page 74: Hmc7030A-L (12 Digital Inputs And 8 Digital Outputs Built-In)
HMC7000 Series I/O Module Guide HMC7030A-L (12 digital inputs and 8 digital outputs built-in) This unit has built-in I/O. It has 12 directional inputs, 6 relay outputs and 2 sinking NPN outputs. Specifications: Power 24VDC ± 15%, 3W Approvals CE, UL... -
Page 75: Wiring
HMC7000 Series I/O Module Guide Operating Temperature 0 to 50°C Operating Humidity 10% to 90% (non condensing) Mechanical Dimension (LxWxH) 5.04x4.02x1.77 inches [128x102x45mm] Panel Cutout 4.69x3.55 inches [119x93mm] Wiring: For connecting to bidirectional inputs: Connecting to outputs: HMC7000 Series I/O Module Guide... -
Page 76: Configuration
HMC7000 Series I/O Module Guide Configuration: Use MAPware-7000 to assign input (X and XW), output (Y and YW), and configuration (M and MW) memory addresses to the module. These addresses are created according to the slot location of the module, where nn... -
Page 77: To Implement High Speed Counter Operation
HMC7000 Series I/O Module Guide High Speed Counter Operation To implement High Speed Counter Operation: 1. Connect a device to X1 (Channel 1) or X2 (Channel 2) that will provide the high speed pulses to the expansion module. 2. Configure for HSC mode using the configuration register MW0010 (Channel 1) or MW0020 (Channel 2). -
Page 78: Common Terms For I/O Modules
HMC7000 Series I/O Module Guide Common Terms for I/O Modules This section defines some common terms used to describe various types of input and output modules. The terms explained below are generic descriptions. Be sure to consult the datasheet for the specific requirements when installing and wiring a module. -
Page 79: Digital Outputs (Pnp Or Npn Type)
HMC7000 Series I/O Module Guide Note: arrow indicates current flow direction In order to have current flow, each I/O terminal on the expansion module must have a return path or a signal ground connection. In most modules, multiple I/O terminals share the signal ground connection. -
Page 80: Analog I/O
HMC7000 Series I/O Module Guide Digital Outputs (Relay type) The output terminals of a relay-type digital module typically control loads that require an AC power source: Use a Relay Output module to connect a DC load that requires more current than the maximum available when using a PNP or NPN output. -
Page 81: I/O Terminals
Configuring the I/O Modules The I/O expansion modules for the HMC7000 Series are assigned to the proper slot using MAPware-7000. Note that any project downloaded into a HMC7000 with modules that do not match the physical configuration of the unit will not run. - Page 82 HMC7000 Series I/O Module Guide 4. Double-click on Slot 1 to display the I/O Allocation dialog: 5. Select from the list box, the particular I/O expansion module installed in Slot 1 of the HMC7000. When the checkbox to ‘Add tags for XW, YW, and MW’ is checked, MAPware-7000 automatically assigns tags to the Tag Database for the I/O module.
- Page 83 HMC7000 Series I/O Module Guide 6. In this example, Slot1 is identified with an IO module, along with a description and memory address allocation. The tags are available in the Tag Database as seen below. These tags can be used in the project to address the I/O.
-
Page 84: Configuration Of The Hmc7000 Series High Speed Counters
Configuration of the HMC7000 Series High Speed Counters Maple Systems’ HMC products have built-in High-Speed counters that link directly to specific inputs and outputs. Specific registers and bits are predefined for setup and control of these counters. No logic is required to run the counters, other than logic that may be used to configure and control the counters. -
Page 85: Configuration Register
HMC7000 Series I/O Module Guide Configuration Register Description 15-4 Reserved (leave set to 0) Edge Trigger: 0 = Falling 1 = Rising Counter Mode: 000 =High Speed Counter Off 2,1,0 010 = High Speed Up Counter Other settings are reserved. - Page 86 HMC7000 Series I/O Module Guide These tags are assigned automatically when a project is created: For products with Modular I/O (Requires the HMC7-MIO-01 or HMC7-MIO-02 module Function Counter 1 Counter 2 Trigger Bit X n000 Xn005 Done Bit Yn001...
- Page 87 HMC7000 Series I/O Module Guide For example, a module installed in Slot 3 has the following assignments: Function Counter 1 Counter 2 Trigger Bit X03000 X03005 Enable Bit M03080 M03176 Done Bit Y03001 Y03006 Reset Bit (Internal, Physical) M03081, X03001...
-
Page 88: Retaining The High Speed Counter Values
HMC7000 Series I/O Module Guide Some Sample Ladder Logic These two rungs configure the High Speed Counters in a unit that has built-in I/O. The HMC ladder logic requires an input condition on each rung. The input bits are the Normally Closed contacts of an otherwise unused bit. - Page 89 Your Industrial Control Solutions Source _____________________ www.maplesystems.com 1010-1043 Rev. 06 Maple Systems, Inc. | 808 134 St. SW, Suite 120, Everett, WA 98204 | 425.745.3229...