Siemens SINUMERIK 840D sl Commissioning Manual page 64

7 Machine Data
7.2 Display machine data for ShopTurn
9725
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9729
MD number
Standard value: –
Change becomes effective after: IMMEDIATELY
Data type: STRING (24)
Significance:
9777
MD number
Standard value: 0x7F
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9802
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
7-64
$MM_CMM_ENABLE_QUICK_M_CODES
Enable fast M functions
Min. input limit: –
Protection level: 3/4
This MD is used to enable fast M functions. This means that the M functions are executed
by the PLC without confirmation.
Bit 0: Coolant 1 ON
Bit 1: Coolant 2 ON
Bit 2: Coolant 1 and 2 ON
Bit 3: Coolant OFF
$MM_CMM_G_CODE_T OOL_CHANGE_PROG
Program name for tool change in the G code
Min. input limit: –
Protection level: 3/4
This MD is used to stipulate the program name for the tool change program. The tool
change program is automatically called as soon as you have programmed a tool in the G
code via softkey.
$MM_CMM_ENABLE_TIME_DISPLA Y
Enable the time display
Min. input limit: –
Protection level: 3/4
This MD is used to define the display of the runtimes.
Bit 0: Program progress display
Bit 1: Display time
Bit 2: Display date
Bit 3: Display machine runtime
Bit 4: Display processing time
Bit 5: Display utilization
Bit 6: Display program repeats
Note
For a description of the display machine data for the measuring cycle, please
refer to section 9.1.2 "Display machine data for measuring cycle".
$MM_ST_INDEX_AXIS_C_SUB
Axis index for separate C axis of counterspindle
Min. input limit: 0
Protection level: 3/4
This MD is used to enter the axis number of the additional counterspindle.
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
Max. input limit: –
Units: –
Valid as of software version
ShopTurn 6.4
Max. input limit: –
Units: –
Valid as of software version
ShopTurn 7.1
Max. input limit: –
Units: –
Valid as of software version
ShopTurn 7.1
Max. input limit: 127
Units: –
Valid as of software version
ShopTurn 6.4
© Siemens AG 2006 All Rights Reserved
11/2006