Siemens SINUMERIK 840D sl Commissioning Manual page 5

11/2006
!
!
Qualified
personnel
Proper use
!
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
Warning
This warning indicates that death or severe personal injury may result if the
proper precautions are not taken.
Caution
This warning (with the warning triangle symbol) means that minor physical
injury may occur if the appropriate precautions are not taken.
Caution
This warning (without the warning triangle) means that material damage may
result if proper precautions are not taken.
Notice
This warning indicates that an undesirable result or state may result if the
appropriate precautions are not taken.
Commissioning and operation of the device/equipment/system in question must
only be performed using this documentation. Only qualified personnel should
be allowed to commission and operate the device/system. Qualified personnel
as referred to in the safety guidelines in this documentation are those who are
authorized to start up, earth and label units, systems and circuits in accordance
with the relevant safety standards.
Please note the following:
Warning
The device may be used only for the applications described in the catalog and
in the technical description, and only in combination with the equipment,
components and devices of other manufacturers where recommended or
permitted by Siemens. Correct, reliable operation of the product required proper
transport, storage, positioning and assembly, as well as careful operation and
maintenance.
Preface
v