Siemens SINUMERIK 840D sl Commissioning Manual page 156

10 Customized User Interface
10.2 Configuring the custom screen
10-156
Note
The screen size is fixed in ShopTurn (see above "Screen Properties"). Take
note of this in case you would like to program background images, for example,
for screens you configured yourself.
Note
Open a user–configured screen before calling a softkey bar.
You can call your own cycles by means of the following access softkeys:
Table 10-3 Entry softkeys for cycles
Exit screen
Program operating area – Drilling
Program operating area –
Program operating area – Milling
Program operating area – Miscellaneous
Note
In manual mode you can also assign your own user cycle to horizontal softkey
8. The NC code generated is then collected and you can then start the cycle
with "Cycle Start"; (see section 10.2.3. "Integrating measuring cycles).
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
Vertical softkey 6
Vertical softkey 6
Turning
Vertical softkey 6
Vertical softkey 4
© Siemens AG 2006 All Rights Reserved
11/2006
Soft key SCxxxx
SC8426
SC9436
SC9456
SC8454