Siemens SINUMERIK 840D sl Commissioning Manual page 103

11/2006
DB73.DBW(n+24)
Edge evaluation
DB73.DBW(n+26)
Edge evaluation
Description
DB73.DBW(n+28)
Description
Corresponding to...
DB73.DBW(n+30)
Edge evaluation
Description
DB73.DBW(n+32)
Edge evaluation
Description
DB73.DBW(n+34)
Edge evaluation
Description
DB73.DBW(n+36)
Edge evaluation
Description
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
Reserved
Signal(s) updated: Conditional
Location no. of old tool to be unloaded
Signal(s) updated: Conditional
Location number of the old tool (used up to now for machining)
Tool new: Location type
The location type of the new tool is entered here.
Tool size: Left, right, top, bottom
Tool new: Size left (Int)
Signal(s) updated: Conditional
Specification of new tool size on left in half locations.
Tool new: Size right (Int)
Signal(s) updated: Conditional
Specification of new tool size on right in half locations.
Tool new: Size top
Signal(s) updated: Conditional
Specification of new tool size at top in half locations.
Tool new: Size bottom
Signal(s) updated: Conditional
Specification of new tool size at bottom in half locations.
8 Tool Management
8.4 Start–up in the PLC
Signal(s) valid from SW: 2
Signal(s) valid from SW: 2
Signal(s) valid from SW: 2
Signal(s) valid from SW: 2
Signal(s) valid from SW: 2
Signal(s) valid from SW: 2
8-103