Siemens SINUMERIK 840D sl Commissioning Manual page 67

11/2006
9823
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9824
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9825
MD number
Standard value: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9826
MD number
Standard value: 3
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
$MM_ST_DISPL_DIR_SUB_SPIND_M3
Displayed direction of rotation for counter–spindle with M3
Min. input limit: 0
Protection level: 3/4
This MD is used to stipulate which direction of rotation of the counter–spindle is displayed
for M function M3 in the operator interface. The settings for the direction of rotation are as
seen looking from the inside out.
0 = Clockwise
1 = Counterclockwise
For more information please refer to the section on "Spindle control".
$MM_ST_DISPL_DIR_MAIN_C_AX_INV
Displayed direction of rotation for C axis main spindle with M3
Min. input limit: 0
Protection level: 3/4
This MD is used to stipulate which direction of rotation of the C axis (main spindle) is dis-
played for M function M3 in the operator interface. The settings must be made according to
the actual direction of rotation of the C axis on the machine.
The settings for the direction of rotation are as looking from the inside out.
0 = Clockwise
1 = Counterclockwise
For more information please refer to the section on "Spindle control".
$MM_ST_DISPL_DIR_SUB_C_AX_INV
Displayed direction of rotation for C axis counter–spindle with M3
Min. input limit: 0
Protection level: 3/4
This MD is used to stipulate which direction of rotation of the C axis (counter–spindle) is
displayed for M function M3 in the operator interface. The settings must be made according
to the actual direction of rotation of the C axis on the machine.
The settings for the direction of rotation are as looking from the inside out.
0 = Counterclockwise
1 = Clockwise
For more information please refer to the section on "Spindle control".
$MM_ST_DEFAULT_DIR_TURN_TOOLS
Main direction of rotation for all turning tools
Min. input limit: 3
Protection level: 3/4
This MD is used to stipulate the main direction of rotation for all turning tools.
3 = M3
4 = M4
7.2 Display machine data for ShopTurn
Max. input limit: 1
Valid as of software version
ShopTurn 6.1
Max. input limit: 1
Valid as of software version
ShopTurn 6.1
Max. input limit: 1
Valid as of software version
ShopTurn 6.1
Max. input limit: 4
Valid as of software version
ShopTurn 6.1
7 Machine Data
Units: –
Units: –
Units: –
Units: –
7-67