Siemens SINUMERIK 840D sl Commissioning Manual page 155

11/2006
Generate code
Entry softkeys
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopTurn – 11/2006 Edition
Table 10-1 Fixed dimensions of ShopTurn screens
Exit screen
Program operating
area – G code editor
Alarms operating area
Operating area –
Tools/Zero offsets
Do not enter a target directory for the program operating area and the manual
mode. ShopTurn defines the target file.
The customized static screens can be displayed with the following entry soft-
keys, the SC number being the link between the entry softkey and the configu-
ration file of the screen.
In manual and automatic modes you have the choice between different sized
screens that fill the following window areas:
S
Large: Status area, position display, or program display and
input window
S
Medium: Position display or program display and input window
S
Small: Input window
Table 10-2 Entry softkeys for screens
Exit screen
Manual operating mode Horizontal softkey 8
Automatic mode
Messages/Alarms oper-
ating area
Messages/Alarms oper-
ating area
Operating area –
Tools/Zero offsets
10 Customized User Interface
10.2 Configuring the custom screen
Soft key
Horizontal softkey 2
...
Horizontal softkey 6
Horizontal softkey 7
Horizontal softkey 6
Horizontal softkey 7
Soft key
Large
Horizontal softkey 8 Average
Horizontal softkey 8 Small
Horizontal softkey 6 Small
Horizontal softkey 6 Average
Horizontal softkey 6 Large
Horizontal softkey 7
Horizontal softkey 8
Horizontal softkey 7
Size Dimensions
X–pos. = 0
Y–pos. = 34
height = 396 pixels
width = 556 pixels
X–pos. = 0
Y–pos. = 34
height = 396 pixels
width = 556 pixels
X–pos. = 0
Y–pos. = 34
height = 396 pixels
width = 556 pixels
Size SCxxxx
SC818
SC8181
SC8182
SC826
SC8261
SC8262
SC857
SC858
SC867
10-155