Operable Flow Range; Output; Output Signal - Endress+Hauser Proline Promass E 100 Manual

Proline Promass E 100

Operable flow range

Output signal

Endress+Hauser
Заказывайте на сайте: www.tinnova.ru/endress_hauser/ || Эл. почта: info@tinnova.ru
Maximum possible full scale value:
 =  · ρ : x = 70 000 kg/h · 60.3 kg/m³ : 125 kg/m³ = 33 800 kg/h
max(G) max(F) G
Recommended measuring range
"Flow limit" section →  53
Over 1000 : 1.
Flow rates above the preset full scale value do not override the electronics unit, with the result that
the totalizer values are registered correctly.

Output

HART current output
Current output 4-20 mA HART (active)
Maximum output values • DC 24 V (no flow)
• 22.5 mA
Load 0 to 700 Ω
Resolution 0.38 µA
Damping Adjustable: 0.07 to 999 s
Assignable measured • Mass flow
variables • Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature

Pulse/frequency/switch output
Function Can be set to pulse, frequency or switch output
Version Passive, open collector
Maximum input values • DC 30 V
• 25 mA
Voltage drop For 25 mA: ≤ DC 2 V
Pulse output
Pulse width Adjustable: 0.05 to 2 000 ms
Maximum pulse rate 10 000 Impulse/s
Pulse value Adjustable
Assignable measured • Mass flow
variables • Volume flow
• Corrected volume flow
Frequency output
Output frequency Adjustable: 0 to 10 000 Hz
Damping Adjustable: 0 to 999 s
Pulse/pause ratio 1:1
The range of options increases if the measuring device has one or more
application packages.
9