Overwrite File: For; Save File To Different No.: Frg - Panasonic LP-GS Series Serial Communication Command Manual

3-4-3 Overwrite file: FOR

Overwrites the current file onto the laser marker.
⿎ Setting request data
Start
FOR
code
⿎ Example of command settings
• Setting
Transmission data
• By this command, in addition to the editing file contents, the settings of the global functional characters such as global
counter, date and lot, and reference list characters for all files are saved to the laser marker.
• When the setting is changed by the following commands, the modified data is saved in the laser marker without
overwriting operation.
• Current counter value of counter settings (CNT)
• Counter reset (CTR)
• Motion settings (TRG)
• Encoder resolution (ENC)
• System clock (YMD)

3-4-4 Save file to different No.: FRG

Saves the current file to the specified file number in the laser marker.
⿎ Setting request data
Start
FRG
code
⿎ Data description
Data length
Name
[byte]
File number
Total data length
⿎ Example of command settings
Condition: File number = 1234
• Setting
Transmission data
S (Check sum)
[STX] FOR
[File number]
S
4-byte
Data contents
4 "0000"–"9999"
4 The data length is fixed.
[STX] FRG
ME-LP-GS-SR-COMP-3
End code
S [CR]
(Check sum)
When you save files by this command, the active file
number is switched to the selected number.
S 1234 [CR]
End code
Remarks
67