Registered Character Settings: Rkc - Panasonic LP-GS Series Serial Communication Command Manual

3-6-6 Registered character settings: RKC

Sets the input format of the "Registered characters" function used to switch characters by I/O input.
⿎ Setting request data / response data for readout
Start
RKC
code command
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
RKC
code
⿎ Data description
Name Data length [byte]
I/O input format
Total data length
⿎ Example of command settings
Condition: I/O input format = 1
• Setting
Transmission data
• Readout
Transmission data
Response data
• Registered characters (via I/O) cannot be set together with the following functions in one file.
• Characters specified by SIN command
• External offset function with "Using SEO command"
• On-the-fly marking at regular intervals
• On-the-fly marking with multiple triggers
Sub [I/O input format]
1-byte
R (Check sum)
Data contents
"1": 4-bit x 4
1
"2": 8-bit x 2
1 The data length is fixed.
[STX] RKC
[STX] RKC
[STX] RKC
ME-LP-GS-SR-COMP-3
(Check
End code
sum)
End code
It is the assignation method of the data number
for I/O terminal.
S 1 [CR]
R [CR]
A 1 [CR]
Remarks
85