Scan Speed: Ssp - Panasonic LP-GS Series Serial Communication Command Manual

3-12-2 Scan speed: SSP

Sets the scan speed for the current file.
• The settings by this command are applied to all objects in the file. If you want to change the scan speed correction value
of the specified object only, set the scan speed correction by each object setting.
⿎ Setting request data / response data for readout
Start
SSP
code
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
SSP
code
⿎ Data description
Name
Scan speed
Total data length
⿎ Example of command settings
Condition: Scan speed = 2000
• Setting
Transmission data
• Readout
Transmission data
Response data
128
Sub [Scan speed]
command 5-byte
R (Check sum)
Data length
[byte]
Model
LP-GS051
LP-GS052
5
LP-GS051-L
LP-RC350S
LP-RF200P
LP-RV200P
5 Fixed length.
[STX] SSP
[STX] SSP
[STX] SSP
(Check
sum)
End code
Data contents
Setting range [mm/s]
"00001"–"03000"
"00001"–"02000"
"00001"–"12000"
S 02000 [CR]
R [CR]
A 02000 [CR]
ME-LP-GS-SR-COMP-3
End code
Remarks