Panasonic LP-GS Series Serial Communication Command Manual page 29

⿎ Communication sequence when the marking end verification (MST) command response is
enabled
The laser marker transmits the response data automatically upon completing the marking trigger processing (at the end of
marking) with the response permission setting of the marking end verification (MST) command.
This response data indicate that the marking trigger processing of the laser marker completed normally or ended
abnormally by an error.
For more information on this command, refer to "3-3-8 Marking end verification: MST" (P.63).
• When the response permission of the marking end verification (MST) command is set
External device
Send the next request
command after
confirming the marking
completed with MST
response.
Marking end verification command
(Response permission specified) : MSTS1
Positive response: ACK00
Shutter (open) command: SHTS1
Positive response: ACK00
Marking trigger command: MRKS1
Positive response: ACK00
Marking status response
(completed normally): MSTA0000
Marking trigger command: MRKS1
Positive response: ACK00
Marking status response
(abnormal end by an error): MSTAE...
Shutter (close) command: SHTS0
Positive response: ACK00
ME-LP-GS-SR-COMP-3
Laser marker
Marking operation
An alarm or a warning
occurred during the marking
trigger processing.
29