Marking End Verification: Mst - Panasonic LP-GS Series Serial Communication Command Manual

3-3-8 Marking end verification: MST

Enables automatic response of marking result (e.g. normal end, and error occurrence, etc.) at the end of marking.
For the communication sequence of this command, refer to "Communication sequence when the marking end verification
(MST) command response is enabled" (P.29).
⿎ Setting request data / response data for readout
Start
MST
code command
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
MST
code
⿎ Data description
Data length
Name
Response setting
Total data length
• Once you set the response settings of the marking end verification, they are valid during the remote mode.
• When the marking end verification is used, set the response permission before every shifting to the remote mode. This
command setting will be restored to the response prohibited state once you deactivate the remote mode.
Sub [Response setting]
1-byte
R (Check sum)
Data contents
[byte]
"0": Response prohibited
1
"1": Response permitted
1 The data length is fixed.
ME-LP-GS-SR-COMP-3
(Check sum)
End code
End code
Remarks
63