Human Readable Text Settings: Brv - Panasonic LP-GS Series Serial Communication Command Manual

3-7-4 Human readable text settings: BRV

Sets the character conditions to mark the character strings of bar code/2D code as the human readable text.
⿎ Setting request data / response data for readout
Start
BRV
code
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
BRV
code
⿎ Data description
Name
(> Name in LP-400/V)
Object No.
(> Bar code No.)
Positional offset
target
Relative X-position
Relative Y-position
Character height
Character width
Character spacing
Font No.
100
[Object No.] [Positional offset target]
[Relative X-position] [Relative Y-position]
[Character height] [Character width]
[Character spacing] [Font No.]
Sub
[Laser power correction] [Scan speed correction]
command
( [Linefeed] [Linefeed spacing] )
LP-GS/LP-RC: 54-byte, 47-byte or 46-byte
LP-RF/LP-RV: 57-byte, 50-byte or 49-byte
[Object No.] [Positional offset target]
R
2-byte
Data length
[byte]
1 "0"–"7": Object No. 1100 to 1107
"1": Bar code / 2D code / 1D side of the
1 composite codes
"2": 2D side of the composite codes
8
"-999.999"–"+999.999" [mm]
8
Model
7
LP-GS051(-L)
LP-GS052
LP-RC350S
LP-RF200P
7
LP-RV200P
Model
LP-GS051(-L)
LP-GS052
7
LP-RC350S
LP-RF200P
LP-RV200P
1 "1"–"9"
[Pulse cycle correction]
(Check sum)
Data contents
Setting range [mm]
"000.100"–"055.000"
"000.060"–"030.000"
"000.100"–"085.000"
"000.100"–"090.000"
Setting range [mm]
"000.000"–"055.000"
"000.000"–"030.000"
"000.000"–"085.000"
"000.000"–"090.000"
ME-LP-GS-SR-COMP-3
(Check
End code
sum)
End code
Remarks
Select to which code the settings
of the relative X-/Y-position are
applied.
• It is the relative position to the
code center.
• Specifies the left lower position
of the first character.
• For the composite codes, the
positions of 1D and 2D side can
be separately specified.
For the composite codes, the
settings from "character height" are
applied to both 1D and 2D side.