Panasonic LP-GS Series Serial Communication Command Manual page 71

• Refer to "2-3-5 Character data input method" (P.37) for details on the character input method and character types with
input restrictions.
• Characters in TrueType object cannot be set with communication command.
• For response data for readout, all characters except the functional characters are readout in 2-byte characters (Shift-JIS
code) regardless the settings.
• When the character strings set with the functional character are readout, the setting of the functional character starting
with % are read out. The characters to mark as the functional characters, such as the counter or date and time values,
are not read out.
• With LP-400/V compatible command mode, you cannot readout the character strings with more than 61-byte length.
• With LP-400/V compatible command mode, the character object other than the reference list type cannot be set.
• With LP-400/V compatible command mode, the character string No. 51 to 100 cannot be set and readout.
⿎ Example of command settings
Condition: String No. = 51, Marking character (counter function and character "abcd") = %06:C0abcd
• Setting
Transmission data
• Readout
Transmission data
Response data
[STX] STR S 51%06:C0abcd
[STX] STR R 51
[STX] STR A 51%06:C0 ａｂｃｄ
ME-LP-GS-SR-COMP-3
[CR]
[CR]
[CR]
71