Lot Settings: Ltc - Panasonic LP-GS Series Serial Communication Command Manual

3-6-4 Lot settings: LTC

Configures the "Lot" function used to change characters depending on the date/time and counter values.
⿎ Setting request data / response data for readout
Start
LTC
code
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
LTC
code
⿎ Data description
Data length
Name
Lot No.
Lot type
Lot unit
Total data length
• When the lot unit of the lot settings (LTC command) is changed, the lot period and lot character (LTS command) settings
registered to that lot number are deleted.
• With LP-400/V compatible command mode, the lot numbers 4 to 15 and global lot numbers 20 to 31 cannot be set and
readout.
⿎ Example of command settings
Condition: Lot No. = 0, Lot type = 00, Lot unit = 8
• Setting
Transmission data
• Readout
Transmission data
Response data
82
Sub [Lot No.] [Lot type] [Lot unit]
command 4-byte
[Lot No.]
R
1-byte
[byte]
"0"–"3": Lot 0 to 3
1
"4"–"7": Global lot 16 to 19
"00": Current date/time
"01"–"04": Expiry date/time 1 to 4
2 "05"–"08": Global expiry date/time 17 to 20
"10"–"13": Counter 0 to 3
"14"–"17": Global counter 16 to 19
"0": Year or counter
"1": Month
"2": Day
"3": Year and month
"4": Month and date
1 "5": Day of the week
"6": Hour
"7": Week
"8": Minute
"9": Hour and minute
"A": Year (week-based)
4 The data length is fixed.
[STX] LTC
[STX] LTC
[STX] LTC
(Check
sum)
(Check
End code
sum)
Data contents
S 0008 [CR]
R 0 [CR]
A 0008 [CR]
ME-LP-GS-SR-COMP-3
End code
Remarks
Specifies which function you are
referencing, the current date/time,
expiry date, or counter, to switch lot
characters.
It is the unit of period to switch lot
characters.