Laser Fine Tune: Wtc - Panasonic LP-GS Series Serial Communication Command Manual

3-12-4 Laser fine tune: WTC

Fine-tunes lasing quality such as starting and ending point by each file.
⿎ Setting request data
Start
WTC
code
⿎ Readout request data
Start
WTC
code
⿎ Response data for readout
Start
WTC
code
⿎ Data description
Data length
Name
Starting point
Ending point
Corners
Curve
Waiting time
Pre-scan time
Jump *
System reserved
value *
System reserved
value *
Total data length
* These items can be omitted.
130
[Starting point] [Ending point] [Corners] [Curve]
[Waiting time] [Pre-scan time] [Jump]
S
[System reserved value] [System reserved value]
33-byte, 25-byte or 22-byte
R (Check sum)
[Starting point] [Ending point] [Corners] [Curve]
[Waiting time] [Pre-scan time] [Jump]
A
[System reserved value] [System reserved value]
Data contents
[byte]
4 "-100"–"+100"
4 "-100"–"+100"
3 "000"–"100"
3 "000"–"100"
3 "000"–"100"
5 "00.00"–"10.00" [ms]
(3) "000"–"100"
(4) "0.00"–"9.99"
(4) "0.00"–"9.99"
Fixed length.
33
• When sending all data and response data for readout: 33-byte
(25)
• When system reserved values are omitted: 25-byte
(22)
• When jump and system reserved values are omitted: 22-byte
End code
33-byte
• With a larger value, lasing time becomes
longer.
• Jump and system reserved values can be
omitted.
• If the jump is omitted, omit the system
reserved values, too.
• If the jump is omitted, the value set last (the
initial value if it was not set) is applied.
• These settings correspond to "point
radiation on wait" and "point radiation off
wait" at LP-400/V series. These values do
not affect the settings anymore.
• It is not possible to omit one side of the
system reserved values.
ME-LP-GS-SR-COMP-3
(Check
End code
sum)
(Check
End code
sum)
Remarks