Operation Control Commands; Command Reception Permission: Mkm - Panasonic LP-GS Series Serial Communication Command Manual

Laser marker lp-400/v compatible mode
Hide thumbs Also See for LP-GS Series:
Table of Contents

Advertisement

3-3 Operation Control Commands

3-3-1 Command reception permission: MKM

Controls the reception permission (reception mode ON/OFF) of the settings by communication commands.
In the shutter open or marking trigger ready ON status, set "command reception permission ON" when transmitting the
command including an action to update the laser marker data.
To resume the marking trigger ready ON status after command transmission, set "command reception permission OFF".
⿎ Setting request data / response data for readout
Start
MKM
Sub command
code
Sub command is "S" for the setting request data and "A" for the response data for readout.
⿎ Readout request data
Start
MKM
code
⿎ Data description
Data length
Name
[byte]
Command
reception
permission
Total data
length
• Refer to "2-4 Command Reception Condition" (P.42) for details on the command reception permission.
• Send MKM command with the shutter opened state.
• When the command reception status is readout during the shutter closed, the response data indicates the status as
"command reception permission ON".
• MKM command is not acceptable during the guide laser emission or laser radiation for measurement.
• It is possible to recover from the warning status by sending "command reception permission ON" of the MKM command.
⿎ Example of command settings
Condition:
Command reception permission = 0
• Setting
Transmission data
• Readout
Transmission data
Response data
56
[Command reception permission]
R
(Check sum)
Data contents
"0": Command reception
permission ON
1
"1": Command reception
permission OFF
1
The data length is fixed.
[STX]
[STX]
[STX]
1-byte
End code
Setting "command reception permission ON" turns
OFF the marking trigger ready to start receiving
commands.
Setting "command reception permission OFF" ends
the command reception to resume the marking trigger
ready ON status.
MKM
S
0
[CR]
MKM
R
[CR]
MKM
A
0
[CR]
ME-LP-GS-SR-COMP-3
(Check sum)
End code
Remarks

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents