Marking Field And Marking Center Position - Panasonic LP-S Series Maintenance Manual

2-3-5 Marking field and marking center position

Specified point
A : Work distance
B : Marking field (X, Y)
*1 : The work distance can arbitrarily be set by laser setting, within the range of 193 mm +/- 20 mm (173 to 213 mm).
*2 : The work distance can arbitrarily be set by laser setting, within the range of 357 mm +/- 30 mm (327 to 387 mm).
Unit: mm
• Do not place anything in the area between the laser emission port and lasing object during the marking operation.
• Use anti-reflection material (ex. black paint for metal) for an external shutter or a protective enclosure in a path of laser
beam. It may cause a failure of the components inside the laser marker head.
• If any other devices such as a sensor or a camera are installed near the laser marker, make sure that these devices are
installed in the place where laser beam and its reflected beam do not damage to them.
LP-S200/S500 LP-S500W
190 mm 193 mm *1
90 mm × 90 mm
56.5
113
B
Marking center
ME-LPS-SSM-8
LP-S202/S500 LP-S205/S505
130 mm 350 mm
55 mm × 55 mm
106
A
B
LP-S505W
357 mm *2
160 mm × 160 mm
57